Why Choose TAB FLOORING

The QHZ-type Film Scratch Tester (also known as the Coating Scratch Tester/Coating Hardness Tester) is primarily used to determine the scratch resistance of coatings, in order to evaluate the hardness, adhesion, and scratch resistance performance of the coating.

The Single Column Electronic Universal Material Testing Machine (commonly referred to as a Tensile Testing Machine) is primarily used to test the peel and lock tensile strength of products.

The Fully Automatic Solid Density Meter is primarily used to test the density of products in order to verify their stability.

The Electronic Analytical Balance is used for sample preparation before testing, providing accurate mass data for density testing, ash content testing, moisture content testing, and other analyses.

The Moisture Meter is used to detect the moisture content of raw materials such as PVC and calcium powder, preventing excessive moisture from affecting the extrusion molding process.

The Whiteness Meter is used for raw material testing: it measures the whiteness of materials such as calcium carbonate, titanium dioxide, and PVC resin powder, which directly affects the base color of the flooring substrate.

The Shore Hardness Tester is used for SPC flooring substrate testing: it measures the hardness of finished flooring products to assess the material's rigidity, impact resistance, and wear resistance.

The Electric Hot Air Drying Oven is primarily used to test the shrinkage and warping of products.

The Muffle Furnace is used for raw material ash content testing: it measures the ash content of materials such as PVC and calcium carbonate to assess the purity of the raw materials.